Sony a7 III & a7R III Firmware Update 2.00 Adds LA-EA3 Adapter AF Modes

Published: October 10, 2018

Sony a7 III & a7R III Firmware Update 2.00

Sony a7 III & a7R III Firmware Update 2.00 adds Sony LA-EA3 lens adapter support for Zone, Expanded Flexible Spot, and Lock-on AF on a7 III & a7R III cameras.

Release Date

10/10/2018

Download Links:

FW 2.00 for a7 III | FW 2.00 for a7R III
[Please Note: Mac OS 10.13 High Sierra users must first run Mac OS X Driver Loader before running any firmware updates.]

Before Updating Firmware Please Read:

Bulletproof Guide to Sony Camera Firmware Updates

Order Sony LA-EA3 from B&H Photo | Amazon | Sony
Order Sony a7 III from B&H Photo | Amazon | Sony
Order Sony a7R III from B&H Photo | Amazon | Sony

Apply for B&H Photo Payboo Card

Thank you for supporting this website through purchases from our affiliate partners! We always strive to bring you the best deals and lowest prices.

Sony Releases More than 45 Updates for Alpha 1, a7S III, a7 IV & a9 III Cameras

Published: March 27, 2024 Sony releases more than 45 Firmware Updates for Alpha 1, Alpha 7S III & Alpha 7 IV cameras to improve Shooting

Read More »
Sony-a7R-V-Firmware-2-02

Sony Releases a7R V Firmware Update 2.02 with Multiple Bug Fixes

Published: March 27, 2024 Sony a7R V Firmware Update 2.02 adds multiple bug fixes via the memory card firmware update process. Benefits and Improvements •

Read More »
Sigma-50mm-F1-2-DG-DN-Art-Lens-E

Sigma Announces Ultra-Fast 50mm f/1.2 DG DN Art Lens

Published: March 26, 2024 Sigma 50mm f/1.2 DG DN Art Lens ($1,399) is the lightest in its class and the brightest in Sigma’s 50mm prime

Read More »

20 thoughts on “Sony a7 III & a7R III Firmware Update 2.00 Adds LA-EA3 Adapter AF Modes”

    1. It worked, no problem. It has become a bit more complicated, because you have to grant some privileges to the updater in the security prefpane.

  1. Anders Rønningen

    Just tried, and it did not work for me on Mojave. After connecting the camera in mass storage mode and pressing Ok, nothing happens. Btw, should I be using the USB-C or the micro USB connector. The instructions say to use the cable that came with the camera, and there was no USB-C in the box.

  2. Testing the A7Riii this evening with the new firmware on the following lenses:
    SAL30028G2 – all focus modes available… focus seems more responsive
    SAL70200G2 – all focus modes available… focus seems more responsive
    SAL2470ZA – all focus modes available… focus seems more responsive or no change
    Tamron 15-30mm – all focus modes available… focus is definitely more responsive than before
    Tamron 90mm Macro SP DI USD – all focus modes available… focus is the same… hunts before locking on especially in low light

  3. I need to walk away and try again in the morning and I will follow your steps posted here. Following the Sony site for Mac 10.13 has been a royal pain in the you know what! An hour wasted and still no success. Sony builds great cameras but their software process is unbelievable. They have made it even harder that it was before! The special updater for the updater is apparently doing nothing regardless of what I “allow”.

  4. Still have problems with the update on 10.3.6 even with the driver loader installed. It kept asking for security check – I already have the firewall turned off and temporarily shut off the anti virus software. Of note, I did not upgrade to v1.10 when it was released earlier. My 7RIii is still in v1.00. Does it matter? Do I have to upgrade to v1.10 first? Thanks

    1. No, there’s is no need to install v1.10 before updating to v2.00. Everything in v1.10 is contained in the v2.00 update.

      Previous 10.13 Updates required you:

      !. Run 10.13 Driver Loader first – you don’t actually install it – rather you run it a the start of the process.

      2. Only once that is done, do you open the firmware update – the update is inside the ‘Resources’ Folder as shown in this post. The camera should NOT yet be connected as you launch the update.

      3. Once the firmware update tells you to connect the camera should you do so using the cord that came with your camera. At that point simply follow all on screen directions. Camera firmware updates take about 15 minutes to run.

  5. Hello!
    Maybe my question is a bit off topic, but it’s in a way regarding the 2.0 firmware update, so…
    I wonder if you have found a way to manage to get the A7R III to do “stop down” AF with the Canon EF 50mm f/1.2? With the native lenses you are supposed to be able to choose between stop down and fully open aperture with firmware 2.0. But with this lens I have tried and failed to find a way with either the Metabones IV or the Sigma mc-11 adapter. It would be very useful with this particular lens, since it has a serious focus shift if you would like to stop it down.
    Best regards
    Jan

  6. Thank you for the fast reply!
    That works well for manual focusing, and is good to know. I hadn’t realized that function was available for the Sony A7 series.
    However (maybe obvious) it’s not possible to get AF at the same time, neither to magnify (as far as I managed to do anyway) while one activates that dedicated button.
    When using the native lenses you’ll could have the stop down AF automatically (for bad or worse).
    Thanks again for clearing that out for me.

  7. Not really. I want to have the lens stopped down while the camera is doing the AF. The focus shift with the Canon EF 50mm F/1.2 is so severe that if I take a picture with eye AF of a person with his/her head in a 55 degree angle towards me with F/4, it focuses on the first eye, but the Second eye turns up in in focus in the final picture. When I do the same thing in F/1.2 it nails the First eye. And no, it’s not just with eye AF that I’ll get the shift.
    But after your reply, and my attempts with my now dedicated “Shot Result Preview” button, I assumed that it’s not possible to have stopped down AF for this lens.
    What I tried, was to press the shutter button for AF, while holding my now dedicated “Shot Result Preview” button. But that didn’t work.
    Then I went with the second best thing, trying to magnify while pressing my “Shot Result Preview” button, so at least I could see properly, but that failed as well.

Leave a Comment

Your email address will not be published. Required fields are marked *