Sony PXW-FS7 II XDCAM Super 35 Camera Available for Pre-Order

Sony-FS7-II-Pre-Order

Sony PXW-FS7 II Pro Video camera is available for Pre-order! It adds the Electronic Variable ND and Rec.2020 color space from the Sony FS5 with locking E-mount, more assignable buttons and mechanical improvements to the VF mount and hand grip extension and is expected to begin shipping in January 2017.

Product Highlights

• Super 35-Sized CMOS Sensor
• Locking Sony E-Mount
• Integrated Electronic Variable ND Filter
• DCI 4K (4096 x 2160) up to 59.94p
• UHD up to 59.94 fps, HD up to 180 fps
• XAVC-I/L, MPEG-2, XAVC up to 600 Mb/s
• Supports Rec. 709 and BT-2020
• Dual XQD Memory Card Slots
• Dual HD/3G-SDI & HDMI Output
• Ergonomic Handgrip with Camera Controls

PRE-ORDER NOW

Sensor

The 4K Super 35 EXMOR sensor features 14 Stops of latitude and a wide color gamut. It offers a choice of XAVC or MPEG-2 codecs. The XAVC codec can be used for 4K and HD recording, while MPEG-2 is limited to HD recording. XAVC comes in two flavors, XAVC INTRA, and XAVC Long, allowing you to encode from HD to UHD using Intra-Frame or Long GOP compression with 10-bit 4:2:2 for HD and the choice of 10-bit 4:2:2 or 8-bit 4:2:0 for UHD. XAVC intra compression is very efficient, recording at modest bit rates and XAVC Long also substantially extends the recording time while attaining very high quality and low noise.

Signal Processing

The Camera supports two signal processing modes; Cine-EI and Custom. Cine-EI offers three color grading spaces for electronic cinematography production. The Custom mode supports Rec-709 and Rec BT-2020 at UHD 3840 x 2160 with Y, Cb, Cr color subsampling. You can set the PXW-FS7 II to record onboard and monitor on a BT 2020 compliant monitors via HDMI 10-bit 4:2:2 or SDI at 10-bit 4:2:2 with a 709 monitor LUT applied.

Locking E-Mount

Sony-FS7-II-Locking-E-Mount

The PXW-FS7 II is equipped with a locking E-Mount that provides improved stability and strength compared to a standard E-Mount. It features a safety interlock system that helps prevent accidental disengagement of your lens from the camera body. The locking mount also reduces lens play compared to a standard E-Mount and the locking mount is strong enough to support long cine and ENG zooms that normally require a lens support.

It accepts optional E-Mount lenses from Sony, Zeiss and other manufacturers. The shallow flange distance of the E-Mount allows you to mount most 35mm lens types such as PL, Canon EF, Leica, Nikon, as well as many others with simple mechanical adapters.

Electronic Variable ND

Behind the lens mount sits a retractable clear filter. When you engage the internal ND filters, the clear filter retracts and a stepless electronic ND filter drops into place maintaining the proper flange focal distance. You can program the electronic ND filter to act as three individual filters and rotating the filter knob will step between these presets.

Additionally, you can manually adjust the density of the filter from 2 to 7 stops. One of the advantages of the electronically variable ND filter is that you can use the iris on your lens to set your depth of field, and then make exposure adjustments with the ND, as it does not introduce any color shift as the strength of the ND changes.

Magnesium Construction

The camera body is made from magnesium, which is lighter and stronger than aluminum. This allows the camera body to weigh only four pounds. It also incorporates a shoulder pad and is designed to sit on the operator’s shoulder by extending the support arm of the SmartGrip, which allows the camera to be held in front of the operator without requiring a support rig.

SmartGrip

The camera includes an ergonomic handgrip that Sony calls a SmartGrip, which features Zoom, Start/Stop, and Assign controls. The SmartGrip facilitates camera operation with the right hand, leaving the left hand free to operate the lens. Both the arm and handgrip can be positioned at different angles permitting great flexibility, and it has been re-designed for additional extension adjustment.

Redesigned Viewfinder and Mic Holder Mount

Sony-FS7-II-LCD-Mic

With the FS7 II the viewfinder and mic holder mount has been repositioned. The viewfinder and mic holder now attach to a replaceable 15mm rod. This allows you to swap out the included rod with a longer rod (not included), allowing you to move the position of the viewfinder or mic holder relative to the camera. The viewfinder mounts on a square mounting rod that ensures level operation. You can adjust the position of the viewfinder so a left-eye shooter can use their left eye, while the camera is resting on their right shoulder.

Internal Recording

The FS7 II records internally in both DCI 4K and UHD 4K at up to 59.94 fps, and in HD up to 180 fps using XAVC-I or up to 120 fps with XAVC-L. DCI 4K (4096 x 2160) can be recorded internally without the need of an external recorder.

Media Card Slots

The camera features two XQD media slots that support simultaneous or relay recording. The XQD card slots are shallower on the FS7 II compared to the FS7, making inserting and removing media cards easier.

Genlock and Timecode

Genlock and timecode breakout is available with an optional XDCA-FS7, this also allows for raw and ProRes recording with optional recorders.

PRE-ORDER NOW

Sony Releases More than 45 Updates for Alpha 1, a7S III, a7 IV & a9 III Cameras

Published: March 27, 2024 Sony releases more than 45 Firmware Updates for Alpha 1, Alpha 7S III & Alpha 7 IV cameras to improve Shooting

Read More »
Sony-a7R-V-Firmware-2-02

Sony Releases a7R V Firmware Update 2.02 with Multiple Bug Fixes

Published: March 27, 2024 Sony a7R V Firmware Update 2.02 adds multiple bug fixes via the memory card firmware update process. Benefits and Improvements •

Read More »
Sigma-50mm-F1-2-DG-DN-Art-Lens-E

Sigma Announces Ultra-Fast 50mm f/1.2 DG DN Art Lens

Published: March 26, 2024 Sigma 50mm f/1.2 DG DN Art Lens ($1,399) is the lightest in its class and the brightest in Sigma’s 50mm prime

Read More »

Leave a Comment

Your email address will not be published. Required fields are marked *