Sony has released camera firmware update FW 1.10 for Sony a7RII mirrorless cameras.
This utility updates the ILCE-7RM2 system software to version 1.10, and provides the following benefits:
• Reduces the chance of the camera changing to front focus when shooting certain scenes. (Note: This symptom rarely occurs.)
• Decreases chroma noise when Long Exposure NR (Noise Reduction) is set to Off. (Note: The noise does not occur when Long Exposure NR is set to On.
• Improves continuous shooting at Hi speed so that it can be used as long with the flash as without the flash.
MAC 10.10 YOSEMITE USERS:
MAC 10.10 Yosemite users if you have not already done so, you will need to first install Mac OS X 10.10 Driver Loader before running any updates.
Before you attempt to update a camera, PLEASE READ & FOLLOW all the directions very carefully! Shut down every other application on your computer. Disable Sleep mode on your computer. Remove you camera memory card and Disable any pop-ups or security software.
Updates take about 15 minutes the camera screen may go blank during that time – DO NOT TOUCH yoour camera while it is updating. Just don’t.
WARNING: Each utility is designed for a specific camera. Do not install this utility with any other model besides a7RII.
WARNING: This Digital Camera firmware update and any changes incurred by it are permanent. It is not possible to return to a previous firmware version after updating this firmware. By continuing this update process and downloading and updating this firmware, you acknowledge that you are aware and understand that this update cannot be reversed.
IMPORTANT: Do not allow the computer to enter Sleep (Standby) mode during the update process. To change your settings, please refer to your computer manual or consult the manufacturer.
WARNING: The camera may not operate properly if the power is interrupted during the update: When performing the firmware update, use a fully charged NP-FW50 rechargeable battery pack, or the AC-PW20 AC adapter/charger.
To ensure that no other program interferes with the installation, save all work and close all other programs.
If you’re not familiar with Sony firmware updates – print out the instructions as a reference during the installation process.
The update process takes about fifteen minutes to complete.
WARNING: Do not power off the camera or disconnect the USB cable until the update process is complete.